PRODUCTS
- 首頁
- 產品介紹
加入詢價
加入詢價
主要尺寸與性能資料
| di | 240 mm | 內徑 |
0.5 mm | 內徑公差上限 | |
-0.5 mm | 內徑公差下限 | |
| diZT | 238 mm | Diameter centring inner ring |
0 mm | Diameter centring inner ring 公差上限 | |
-0.07 mm | Diameter centring inner ring 較低的公差 | |
| H | 32 mm | 高度 |
| Da | 384 mm | 外徑 |
| Di ZT | 310 mm | Diameter centring outer ring |
0 mm | Diameter centring outer ring 公差上限 | |
-0.08 mm | Diameter centring outer ring 較低的公差 | |
| T | 3 mm | Length centering outer ring |
| t | 18 mm | Length centering inner ring |
| ha | 30 mm | Width outer ring |
| hi | 30 mm | 內圈高度 |
0.04 mm | Normal 徑向間隙 min. | |
0.16 mm | Normal 徑向間隙 max. | |
0.07 mm | Normal axial clearance min. | |
0.26 mm | Normal axial clearance max. | |
| ≈m | 13.7 kg | 重量 |
尺寸
| da | 302.3 mm | 內圈外徑 |
| ni | 20 | 內圈固定孔數 |
| Li | 262 mm | 內圈螺距圓直徑固定孔 |
| na | 20 | 外圈固定孔數 |
| La | 343 mm | 外圈螺距圓固定孔直徑 |
| dBa | M12 | Tread 固定內徑 |
| Gl | 18 mm | Thread depth fixing hole |
| Fr zul | 82,600 N | Max. radial load fixing screws (friction locking) |
| d0 | 376 mm | Pitch circle diameter gearing |
| m | 4 mm | Modul of gearing |
| z | 94 | Number of teeth |
| b | 30 mm | Width gearing |
| Fz norm | 11,000 N | Max. tooth force root fatigue strenght (at a shock factor of 1,2) |
| Fz max | 16,100 N | Max. tooth force against tooth fracture (at a shock factor of 1,35) |
溫度範圍
| Tmin | -25 °C | 最低工作溫度 |
| Tmax | 80 °C | 最高操作溫度 |
計算參數s
| Ca | 136,000 N | 基本額定動載荷，軸向 |
| C0a | 590,000 N | 基本額定靜態載荷，軸向 |
| Cr | 123,000 N | 基本額定動載荷，徑向 |
| C0r | 270,000 N | 基本額定靜態負荷，徑向 |
您目前的產品型號
| Gearing | N | Normalized gear teeth on bearing ring |