PRODUCTS

首頁
產品介紹

FAG INA Schaeffler

INA

LTE16-100-B-TR12x3-M-0

Linear table LTE16-100-B-TR12x3-M-0

加入詢價

主要尺寸與性能資料

B₁	100 mm	Total Width
L	100 mm	Length of Carriage

安裝尺寸

B_4B	100 mm	Width of Shaft Support Blocks
b₈₇	44 mm	Tolerance ±0,2
D₈₆	17 mm	Tolerance H7
d₈₅	5 mm	Tolerance h7 ¹
d₈₆	0 mm	Tolerance g7
G₃	M8	線
G₄₃	M6	線
G₈₇	M5x12	線
h₈₅	20 mm
h₈₇	22 mm	Tolerance ±0,2
J_B43	88 mm
J_L43	88 mm
j_B4	82 mm
j_L3	9 mm
K₄₃	M5	線
L₈₅	12 mm
L₈₈	28.5 mm
S₃	15 mm
T₃	8 mm
t₄₃	13 mm	Depth of Thread
T₈₆	3 mm

尺寸

H₁	36 mm	Height of Carriage
H_4B	32 mm	Height of Shaft Support Blocks
H_5B	32 mm	Height of Shaft Support Blocks
h₁	18 mm
h_4B	16 mm
h_5B	16 mm
L₄	24 mm	Length of Shaft Support Block with Drive System
L₅	18 mm	Length of Shaft Support Block 沒有 drive System
D₇	16 mm	ø Shaft, Tolerance h7

科技數據

R_X	55.6 mm
R_Z	54 mm
S	3 mm	Safety Distance
m_LAW	0.86 kg	Mass of Carriage
v_max	0.075 m/s	Maximum Speed
a_max	2.5 m/s2	Maximum Acceleration
C_I	1,870 N	Load direction I: compressive load
C_0I	2,120 N	Load direction I: compressive load
C_II	1,870 N	Load direction II: tensile load
C_0II	2,120 N	Load direction II: tensile load
C_III	1,870 N	Load direction III: lateral load
C_0III	2,120 N	Load direction III: lateral load
M_{0x per}	57 Nm	Max. permissible static moment per Carriage ²
M_{0y per}	48 Nm	Max. permissible static moment per Carriage ²
M_{0z per}	45 Nm	Max. permissible static moment per Carriage ²
d₀	12 mm	Spindle Diameter
P	3 mm	Spindle Pitch
C₀	630 N	Load capacity Spindle Nut stat ³
C_0a	630 N	Load capacity fixed Spindle bearing stat

附加資訊

	1.5 Nm	Max. permissible drive torque
	KB16-P	Linear Ball Bearings ⁴
	30/6-2RSR	Rolling Bearings (locating bearing)
	0.25 mm	Repeat accuracy ±
	0.09 kg*cm2	質量慣性矩 of threaded Spindle

溫度範圍

	0 °C	Minimum operating Temperatur
	80 °C	Maximum operating Temperatur

您目前的產品型號

Size code	16
Length of carriage	100	100 mm
Version	B
Drive type	TGT	Trapezoidal screw drive
Spindle diameter	12	12mm
Spindle pitch	03	3 mm
Spindle nut design	M	Cylinder nut
Bellow	0	No

加入詢價