PRODUCTS
- Home
- Product Info
Add item
Add item
Main Dimensions & Performance Data
| d | 50 mm | Bore diameter |
| D | 110 mm | Outside diameter |
| B | 27 mm | Width |
| Cr | 80,000 N | Basic dynamic load rating, radial |
| C0r | 50,000 N | Basic static load rating, radial |
| Cur | 3,500 N | Fatigue load limit, radial |
| nG | 10,900 1/min | Limiting speed |
| nϑr | 6,100 1/min | Reference speed |
| ≈m | 1.21 kg | Weight |
Mounting dimensions
| da min | 61 mm | Minimum diameter of shaft shoulder |
| Da max | 99 mm | Maximum diameter of housing shoulder |
| Db max | 104.4 mm | Maximum diameter of housing shoulder |
| ra max | 2 mm | Maximum fillet radius of shaft |
| ra1 max | 1 mm | Maximum fillet radius of housing |
Dimensions
| rmin | 2 mm | Minimum chamfer dimension |
| r1 min | 1 mm | Minimum chamfer dimension |
| D1 | 87.6 mm | Shoulder diameter on outer ring wide side face |
| d1 | 73.1 mm | Shoulder diameter on inner ring wide side face |
| a | 47.1 mm | Distance between the apexes of the pressure cones |
| α | 40 ° | Contact angle |
Temperature range
| Tmin | -30 °C | Operating temperature min. |
| Tmax | 150 °C | Operating temperature max. |
Additional information
| Amin | 0 µm | Axial clearance per set min. |
| Tol(+) | 10 µm | Tolerance for axial clearance or preload per set |
Your current product variant
| Design variant | B | B |
| Sealing | Without | Not sealed |
| Cage | MP | solid brass cage, ball guided |
| Tolerance class | P5 | Class5 (P5), better than P6 |
| Dimensional / heat stabilization | S0 | Rings dimensional stabilized up to 150° |
| Bearing with matched conditions for fitting in pairs | UO | bearing set clearance-free in O or X arrangement |
| Lubricant | Without | Bearing not greased |