PRODUCTS
- Home
- Product Info
Add item
Add item
Main Dimensions & Performance Data
| d | 30 mm | Bore diameter |
| D | 62 mm | Outside diameter |
| B | 16 mm | Width |
| Cr | 21,900 N | Basic dynamic load rating, radial |
| C0r | 13,000 N | Basic static load rating, radial |
| Cur | 900 N | Fatigue load limit, radial |
| nG | 20,500 1/min | Limiting speed |
| nϑr | 11,300 1/min | Reference speed |
| ≈m | 223 g | Weight |
Mounting dimensions
| da min | 35.6 mm | Minimum diameter of shaft shoulder |
| Da max | 56.4 mm | Maximum diameter of housing shoulder |
| Db max | 57.8 mm | Maximum diameter of housing shoulder |
| ra max | 1 mm | Maximum fillet radius of shaft |
| ra1 max | 0.6 mm | Maximum fillet radius of housing |
Dimensions
| rmin | 1 mm | Minimum chamfer dimension |
| r1 min | 0.6 mm | Minimum chamfer dimension |
| D1 | 49.52 mm | Shoulder diameter on outer ring wide side face |
| d1 | 43.2 mm | Shoulder diameter on inner ring wide side face |
| a | 27.3 mm | Distance between the apexes of the pressure cones |
| α | 40 ° | Contact angle |
Temperature range
| Tmin | -30 °C | Operating temperature min. |
| Tmax | 150 °C | Operating temperature max. |
Additional information
| Amin | 20 µm | Axial clearance per set min. |
| Tol(+) | 8 µm | Tolerance for axial clearance or preload per set |
Your current product variant
| Design variant | B | B |
| Sealing | Without | Not sealed |
| Cage | MP | solid brass cage, ball guided |
| Tolerance class | P6 | Class6 (P6), better than PN |
| Dimensional / heat stabilization | S0 | Rings dimensional stabilized up to 150° |
| Bearing with matched conditions for fitting in pairs | UB | bearing set with smaller axial internal clearance than UA |
| Lubricant | Without | Bearing not greased |