PRODUCTS
- Home
- Product Info
Add item
Add item
n.r.
D | Design variant | |
| ≈m | 0.289 kg | Weight |
Main Dimensions & Performance Data
| d | 30 mm | Bore diameter |
| D | 62 mm | Outside diameter |
| B | 23.8 mm | Width |
| Cr | 31,000 N | Basic dynamic load rating, radial |
| C0r | 22,200 N | Basic static load rating, radial |
| Cur | 1,540 N | Fatigue load limit, radial |
| nG | 9,000 1/min | Limiting speed |
| nϑr | 11,100 1/min | Reference speed |
Mounting dimensions
| da min | 35.6 mm | Minimum diameter shaft shoulder |
| Da max | 56.4 mm | Maximum diameter of housing shoulder |
| ra max | 1 mm | Maximum fillet radius |
Dimensions
| rmin | 1 mm | Minimum chamfer dimension |
| D1 | 53.3 mm | Shoulder diameter outer ring |
| D2 | 55.84 mm | Caliber diameter outer ring |
| d1 | 42.2 mm | Shoulder diameter inner ring |
| d2 | 40.33 mm | Caliber diamter inner ring |
| a | 36.4 mm | Distance between the apexes of the pressure cones |
| α | 30 ° | Contact angle |
Temperature range
| Tmin | -30 °C | Operating temperature min. |
| Tmax | 120 °C | Operating temperature max. |
Your current product variant
| Design variant | B | Bearing without filling slot |
| Sealing | 2Z | Non-contact shield on both sides |
| Cage | TVH | solid cage made of glass-fiber reinforced polyamid PA66 |
| Tolerance class | P6 | Class6 (P6), better than PN |
| Dimensional / heat stabilization | SN | Rings dimensional stabilized up to 120° |
| Lubricant | L069 | low noise high-temperature grease, interchangeable with grease L207 |
| Axial internal clearance | C3 | Group 3 (C3), bigger than CN |