PRODUCTS
- Home
- Product Info
Add item
Add item
n.r.
D | Design variant | |
| ≈m | 9.98 kg | Weight |
Main Dimensions & Performance Data
| d | 95 mm | Bore diameter |
| D | 200 mm | Outside diameter |
| B | 77.8 mm | Width |
| Cr | 237,000 N | Basic dynamic load rating, radial |
| C0r | 227,000 N | Basic static load rating, radial |
| Cur | 13,000 N | Fatigue load limit, radial |
| nG | 2,550 1/min | Limiting speed |
| nϑr | 3,700 1/min | Reference speed |
Mounting dimensions
| da min | 109 mm | Minimum diameter shaft shoulder |
| Da max | 186 mm | Maximum diameter of housing shoulder |
| ra max | 2.5 mm | Maximum fillet radius |
Dimensions
| rmin | 3 mm | Minimum chamfer dimension |
| D1 | 170.94 mm | Shoulder diameter outer ring |
| D2 | 175 mm | Caliber diameter outer ring |
| d1 | 135.88 mm | Shoulder diameter inner ring |
| d2 | 133.61 mm | Caliber diamter inner ring |
| a | 115.8 mm | Distance between the apexes of the pressure cones |
| α | 30 ° | Contact angle |
Temperature range
| Tmin | -20 °C | Operating temperature min. |
| Tmax | 120 °C | Operating temperature max. |
Your current product variant
| Design variant | B | Bearing without filling slot |
| Sealing | 2Z | Non-contact shield on both sides |
| Cage | TVH | solid cage made of glass-fiber reinforced polyamid PA66 |
| Tolerance class | P6 | Class6 (P6), better than PN |
| Dimensional / heat stabilization | S0 | Rings dimensional stabilized up to 150° |
| Lubricant | L140 | Grease (L140/customer specific) |
| Axial internal clearance | C3 | Group 3 (C3), bigger than CN |