PRODUCTS
- Home
- Product Info
Add item
Add item
Main Dimensions & Performance Data
| d | 10 mm | Bore diameter |
0 mm | Bore diameter upper tolerance | |
-0.005 mm | Bore diameter lower tolerance | |
| D | 34 mm | Outside diameter |
0 mm | Outside diameter upper tolerance | |
-0.01 mm | Outside diameter lower tolerance | |
| B | 20 mm | Width |
0 mm | Width upper tolerance | |
-0.25 mm | Width lower tolerance | |
| Ca | 14,700 N | Basic dynamic load rating, axial |
| C0a | 18,800 N | Basic static load rating, axial |
| Cua | 1,140 N | Fatigue load limit, axial |
| nG Grease | 10,900 1/min | Limiting speed for grease lubrication |
| nϑ | 4,600 1/min | Thermally safe operating speed |
| MR | 0.12 Nm | Bearing frictional torque |
| ≈m | 0.097 kg | Weight |
Mounting dimensions
| Da max | 28 mm | Maximum diameter of housing |
| da min | 14 mm | Minimum diameter shaft |
Dimensions
| d1 | 21 mm | Rib diameter inner ring |
| rmin | 0.3 mm | Minimum chamfer dimension |
| r1 min | 0.6 mm | Minimum chamfer dimension |
| α | 60 ° | Contact angle |
Temperature range
| Tmin | -30 °C | Operating temperature min. |
| Tmax | 120 °C | Operating temperature max. |
Additional information
| caL | 325 N/µm | Rigidity axial |
| ckL | 25 Nm/mrad | Tilting rigidity |
| Mm | 0.029 kg*cm2 | Mass moment of inertia |
2 µm | Axial runout | |
ZM10 | Recommended INA precision locknut for radial locking | |
| MA | 6 Nm | Tightening torque for the recommended INA precision locknut |
4,891 N | Required locknut force axial |
Your current product variant
| Sealing | 2RS | Contact lip seals on both sides |
| Tolerance class | Standard |