PRODUCTS
- Home
- Product Info
Add item
Add item
Main Dimensions & Performance Data
| d | 6 mm | Bore diameter |
0.002 mm | Bore diameter upper tolerance | |
-0.003 mm | Bore diameter lower tolerance | |
| D | 24 mm | Outside diameter |
0 mm | Outside diameter upper tolerance | |
-0.01 mm | Outside diameter lower tolerance | |
| B | 15 mm | Width |
0 mm | Width upper tolerance | |
-0.25 mm | Width lower tolerance | |
| Ca | 7,600 N | Basic dynamic load rating, axial |
| C0a | 8,500 N | Basic static load rating, axial |
| Cua | 520 N | Fatigue load limit, axial |
| nG Grease | 19,900 1/min | Limiting speed for grease lubrication |
| nϑ | 12,000 1/min | Thermally safe operating speed |
| MR | 0.02 Nm | Bearing frictional torque |
| ≈m | 39 g | Weight |
Mounting dimensions
| Da max | 19 mm | Maximum diameter of housing |
| da min | 9 mm | Minimum diameter shaft |
Dimensions
| d1 | 14 mm | Rib diameter inner ring |
| rmin | 0.3 mm | Minimum chamfer dimension |
| r1 min | 0.6 mm | Minimum chamfer dimension |
| α | 60 ° | Contact angle |
Temperature range
| Tmin | -30 °C | Operating temperature min. |
| Tmax | 120 °C | Operating temperature max. |
Additional information
| caL | 200 N/µm | Rigidity axial |
| ckL | 8 Nm/mrad | Tilting rigidity |
| Mm | 0.0044 kg*cm2 | Mass moment of inertia |
2 µm | Axial runout | |
ZM06 | Recommended INA precision locknut for radial locking | |
| MA | 2 Nm | Tightening torque for the recommended INA precision locknut |
2,404 N | Required locknut force axial |
Your current product variant
| Sealing | 2Z | Minimal gap seal on both sides |
| Tolerance class | Standard |